CAPWAP Analysis

Signal Matching analysis using PDA data to confirm static soil capacity on both the shaft and base, further evaluate the integrity and stress within the pile.

Thermal Integrity Profiling (TIP)

Pile integrity method performed by installing thermal wire prior to concrete pouring using the heat generated by curing concrete to determine integrity and quality of drilled foundations.

Crosshole Sonic Logging (CSL)

Pile integrity method performed by installing tubes into the pile prior to concrete pouring and using ultrasonic pulses to determine defects within the pile.

Low Strain Integrity Testing (PIT)

Pile integrity method using low strain impacts to determine defects or variations in the pile.

Driveability Analysis (GRLWEAP)

Using Wave Equation Analysis to determine potential driving stresses, required equipment and pile performance prior to arriving on site.

Drilled Shaft Profile Evaluator & Verticality Evaluation (SHAPE)

The SHaft Area Profile Evaluator (SHAPE) can be used in drilled shafts under fluid to determine their profile as well as the verticality of the pile.

Shaft Base Cleanliness Evaluation (SQUID)

The Shaft QUantitative Inspection Device (SQUID) is used to assess base cleanliness and performance.

Gauge Calibration

Piletest can calibrate Strain Gauges and Accelerometers through the use of the ASTCS and MAC, respectively.